Crack welding
direct thermal weld along each fracture line in the tank wall

Jahra
Tank welding in Qasr treats cracks and weak joints in plastic and fibreglass tanks serving residential homes. We inspect the tank carefully, trace the crack path and apply strong welding that withstands continuous hydrostatic pressure. The tank then becomes safe and loss-free.
In Qasr, Jahra governorate, most residential homes have overhead tanks on roofs or underground tanks, most made of plastic or fibreglass. Tanks ten years old or older show weakness in joints and seams, especially with slightly saline or acidic water. Fine cracks appear at the tank top where air sits, spreading downward under water pressure. Before welding we drain the tank, open the area around the crack and clean it with a metal brush. We then run a weld along the crack using strong filler, tested for two hours.
Qasr sits in Jahra governorate north of Kuwait, an older residential zone where thousands of families have lived for many years.
After welding is complete, the tank is filled slowly with cold water and monitored for one hour to confirm no leak.
direct thermal weld along each fracture line in the tank wall
re-welding inlet and outlet fittings where the flange joint has failed
resin-and-mat layer over the damaged zone before the final weld seal
internal camera after welding reveals any weak point before refilling
replacing the tank lid when the leak source is the cover seal
written record of weld locations and camera inspection result
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, if leaking is from the joint only, it can be fixed from above without removing the tank. We clean the joint from outside and apply strong welding that stops the leak immediately.
We advise draining the first water after welding and refilling the tank once more. This removes any welding material traces and ensures clean, safe drinking water.
