Fill valve
Adjusted or replaced when filling is slow, noisy or never stops.

Capital
Toilet cistern repair in Dasman starts by diagnosing continuous leaks or weak flush force. We disassemble the cistern, inspect the fill and flush mechanisms, the float and valve. We replace worn parts, adjust pressure and test the full cycle.
Residential towers in Dasman on the Gulf waterfront contain bathrooms with old drainage pipes and damp floors, and cisterns here face high water pressure from salt and humidity. We inspect supply pipework and copper joints for rust and corrosion, and test water flow before and after repair. The ceramic pan in these buildings requires care with the lower seal between pan and cistern.
Dasman sits on the Kuwait City waterfront facing Dasman Palace, where high-rise residences and high humidity affect cistern performance.
The cistern is filled and emptied three times in succession to confirm stable pressure and no leaks.
Adjusted or replaced when filling is slow, noisy or never stops.
Repaired when water trickles constantly from cistern to pan.
Set or replaced to restore the correct water level inside.
Checked and reseated when the joint leaks at floor level.
Broken or loose seats replaced on the same visit.
Wax or rubber seal replaced when water pools at the base.
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Not always. We first inspect the rubber seal between the pan and cistern and the connecting bolts. Often tightening the bolts or replacing the washer is enough to stop the leak.
There may be a blockage in the fill valve or supply line from limescale and salt deposits. We open the fill valve and clean or replace it, then test the incoming water pressure with a gauge.
