Acoustic surface scan
Tracing the leak sound through tile and screed layers

Farwaniya
In Dajeej leak detection under tiles challenges desert conditions because sand infiltrates floors and masks readings. We use a robust industrial moisture sensor that penetrates sand and cement layers. We pinpoint the location accurately despite wind and intense heat. We test twice to confirm the data.
Dajeej houses sit at the desert fringe with foundations exposed to groundwater seep and deep aquifer moisture, and sand enters floors through tiny cracks around the base. Cold water from main distribution lines runs directly under homes, and any corrosion in old iron pipes or cracks in joints causes slow seepage spreading under tiles. Salt in groundwater accelerates pipe decay. We inspect each section of floor pipe and check trap depths and spans that may cause under-surface pooling.
Dajeej sits in Farwaniya governorate, a desert-fringe area where buildings face challenges from ground moisture and sand infiltration.
We measure moisture levels at different depths under the floor because desert humidity gradates from surface to depth.
Tracing the leak sound through tile and screed layers
Isolating the suspect line and measuring pressure drop to confirm fault location
Filming inside the pipe from the nearest access point to view the crack
Marking the exact spot on the tile surface to minimise breaking area
Checking pipe branches hidden inside the adjacent ceiling or wall
Handing the confirmed location directly to the repair team
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Sand may conceal surface dampness but not subsurface wetness. The sensor penetrates sand and cement and detects water easily because moisture content changes at any leak.
Yes, groundwater pushes up from beneath the foundation and forces moisture through cracks in concrete and gaps around pipes. We detect this pressure by raising main line pressure and monitoring the change.
