Acoustic surface scan
Tracing the leak sound through tile and screed layers

Hawalli
Leak detection under tiles in Salmiya focuses on modern flat complexes and high-rise buildings where pipes run through multiple protective layers. We pinpoint moisture with a sensitive device and trace the pipe without random breaking.
Flats and attached villas near Gulf Road, Marina and Sultan Centre are built to modern standards with tile floors bonded to a reinforced concrete bed. Bathrooms are compact and polyethylene and copper pipes run close together beneath the floor. When moisture appears around a sink or shower we start by measuring water depth under the tile, then trace the pipe route with a tracer from the fixture to the first junction to isolate the leak.
Salmiya in Hawalli sits on the waterfront near Salmiya Co-op and is a zone of modern flat-fronted buildings with thick bonded floors.
We use a dual-frequency metal detector in Salmiya because the density of copper pipes beneath small flats interferes with standard readings.
Tracing the leak sound through tile and screed layers
Isolating the suspect line and measuring pressure drop to confirm fault location
Filming inside the pipe from the nearest access point to view the crack
Marking the exact spot on the tile surface to minimise breaking area
Checking pipe branches hidden inside the adjacent ceiling or wall
Handing the confirmed location directly to the repair team
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We test each pipe separately by isolating supply from the tank or panel. We test cold water first, then hot, then waste, each one in isolation under pressure to identify which one leaks.
No. Quick detector sweep and measurement happen while you are home. Pressure testing needs the main tap closed but does not require evacuating the flat.
