Acoustic surface scan
Tracing the leak sound through tile and screed layers

Hawalli
Leak detection under tiles in Salwa begins with surface inspection for wet patches, texture distortion and colour changes. We use moisture sensors and air pressure testing to trace the pipe run without breaking anything. We pinpoint the exact leak location before you decide what to break.
Most older Salwa houses have supply and waste pipes laid directly under floor tiles without protective ducts, so even a small leak quickly saturates the mortar beneath. We first look for wet patches and slight tile bulging that may not be obvious at first. We then tap along the expected pipe route with a sonic sensor to find the line, then use air pressure testing to confirm the actual leak point with no exploratory drilling.
Salwa lies in Hawalli near Mishref Park and older commercial zones, where most residential buildings have both visible and hidden pipes running through concrete walls.
We sample water at the suspected point to test for mould or contamination before confirming the leak location.
Tracing the leak sound through tile and screed layers
Isolating the suspect line and measuring pressure drop to confirm fault location
Filming inside the pipe from the nearest access point to view the crack
Marking the exact spot on the tile surface to minimise breaking area
Checking pipe branches hidden inside the adjacent ceiling or wall
Handing the confirmed location directly to the repair team
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We use a sonic sensor that taps the tile surface and detects the pipe echo through different sound tones. We then confirm with air pressure testing that sends pulses through the pipe to pinpoint a leak or blockage precisely.
Yes, saturated mortar gradually loses strength and tiles begin to move and crack. Mould grows in the voids and can damage walls and foundations after months.
