Roof-tank pump
Transfers water from ground tank to roof tank reliably.

Jahra
Installing a water pump in Nasseem requires checking the base network pressure and verifying existing tank size. We select a pump by required pressure and lift height, install the pressure switch and filter, and run the full system before handover.
Nasseem contains modern apartment buildings with insulated roof tanks and existing water systems. When installing a new pump we check the suction line from the main supply, clean the inlet strainer and confirm existing pipes can handle the new pressure. We fit a smart pressure switch that cuts the pump when the tank fills and restarts when level drops, protecting the system from constant flow.
Nasseem is located in Jahra governorate, a medium-density residential zone where most units share common water lines.
We run a new pump under full pressure for thirty minutes and check every joint and siphon for leaks before final shutdown.
Transfers water from ground tank to roof tank reliably.
Keeps hot water at the tap without a long wait.
Sets correct cut-in and cut-out points, stops short-cycling.
Evacuates cesspits efficiently with a non-return valve fitted.
Lifts sewage from low-level units to the drainage network.
Protects basements from water accumulation via float-activated switch.
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Maybe, if the old pump can produce the pressure needed for the new tank. We inspect the pump rating and nominal pressure and compare it to new tank size and lift height. If it is too weak we recommend replacement.
If we installed a smart pressure switch, the pump cuts off automatically when the tank is full and runs only when needed. No manual switch-off is required. If there is no smart switch, turning off the pump at night protects the motor from strain.
