Live pressure reading
Measuring cut-in and cut-out values before touching anything

Mubarak Al-Kabeer
Pressure switch repair in Masayel begins by accessing the rooftop tank and inspecting the pressure sensor. We read the current pressure, check the pressure vessel condition and adjust the cut-in and cut-out settings for steady water delivery.
Most Masayel family homes are mid-rise with rooftop tanks and the pressure switch mounted near the tank base. When the switch fails, residents complain of pressure so high it breaks taps or so low water does not rise to upper floors. We climb to the roof, measure actual pressure with a gauge, inspect the vessel for leaks or corrosion and reset the switch to proper operating points.
Masayel in Mubarak Al-Kabeer governorate is a relatively older residential district where homes rely on rooftop tanks and pressure switches for water distribution.
We test the switch under full pressure by opening and closing a kitchen tap several times to confirm precise on-off cycling.
Measuring cut-in and cut-out values before touching anything
Testing the air bladder charge and refilling it if pressure is lost
Cleaning contacts or fitting a new switch matched to pump capacity
Calibrating both thresholds precisely to prevent rapid on-off cycling
Inspecting wiring and terminal resistance at both switch contacts
Running the pump and confirming stable pressure through a full cycle
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Usually the switch setting is wrong or air trapped in the vessel causes the pressure to jump. We read the current setting, bleed air from the vessel via its air valve and reset both the cut-in and cut-out points correctly.
Yes, the switch is always beside the rooftop tank because it senses water pressure there directly. It cannot be set accurately from ground level.
