Line camera check
Camera films the drain before work begins to rule out blockage or fracture

Farwaniya
Sewage pumping in Rai Industrial serves warehouses, small workshops and retail units. Sumps there are deeper and lines longer because buildings are spread out. We size the pump for long-distance lift and test pressure before handover.
Industrial and commercial buildings in Rai have dedicated sumps not shared with neighbors, usually deep due to strong foundations. The distance from sump to discharge or main station may reach hundreds of metres. We calculate pressure loss over this span and select a pump with adequate head. Rocky ground may make excavation hard, so we prefer quiet submersible units.
Rai Industrial is in Farwaniya governorate near a major retail hub, with dispersed buildings and long drainage runs.
The pump is tested with full-length discharge pipe under calculated pressure for ten minutes.
Camera films the drain before work begins to rule out blockage or fracture
Capacity matched to the sewage load and the discharge pipe length
Pump installed with a non-return valve and fully sealed pipe connections
Moisture-rated cable routed clear of standing effluent and secured properly
Operating level set to prevent overflow and protect the pump from dry running
Pump run under real flow before handover to confirm correct discharge
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We calculate the actual lift from sump to outlet, then add pipe friction loss based on diameter and length. Long distances need a pump with higher head, and we may use wider pipes to cut losses.
Yes, because pumps here run at high intensity. We recommend monthly checks of motor, pipes and filters if present. New noise or vibration needs immediate inspection before full breakdown.
