Fault diagnosis
Element, thermostat and wiring tested before any parts are removed

Ahmadi
Electric heater repair at Zour starts by reading temperature, pressure and electrical current gauges. We inspect the element, thermostat and safety valve. We recalibrate if needed. We document all readings before leaving.
Power generation stations at Zour use massive electric heaters to warm cooling water and condensed steam. These heaters are fed from return pipes from condensers, meaning the water carries oil and fine particles. We inspect inlet filters before testing the element. If the filter is clogged water flow drops and the element overheats. We replace the filter as well.
Zour sits in Ahmadi governorate, an industrial zone dedicated to power and water generation.
Tank wall thickness is measured by ultrasound because corrosion is not visible to the eye.
Element, thermostat and wiring tested before any parts are removed
Scaled or burnt element removed and a matched replacement fitted
Thermostat tested and adjusted or replaced if it no longer cuts off correctly
Leak located with camera; tiles are not broken unless the pipe itself is cracked
Calcium sediment drained from the tank base to restore heating capacity
Temperature and pressure confirmed in front of the customer after repair
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Water flow drops sharply so pressure before the filter rises and the element stays partially dry. A dry element burns out quickly. We inspect the filter monthly and replace it at any visible buildup.
Yes, we manually crack it open every three months to confirm it pops at the factory setting. If the valve sticks or leaks continuously we replace it immediately.
