Burner inspection
Clean and adjust the burner for even, complete ignition every cycle

Ahmadi
Gas heater service at Ahmadi Stables starts with a full inspection of the gas line, burner, heat exchanger and automatic controls. We check ignition, gas pressure, ventilation and run safety tests before operation resumes.
The buildings at the stables use gas heaters to supply hot water to athletes' and staff changing rooms, and these units face heavy demand. We inspect the burner for blockage and corrosion, check underground gas lines exposed to moisture, and test the safety valve and cold drain because any leak in these locations needs immediate repair.
Ahmadi Stables sits in Ahmadi governorate as a major sports facility where gas heaters must perform reliably to serve hundreds of daily visitors.
Every heater is pressure-tested at full capacity for three minutes with a gauge before handover.
Clean and adjust the burner for even, complete ignition every cycle
Test every joint with detection solution to locate any minor leak
Inspect the flue path and confirm combustion gases exit the space
Measure thermostat accuracy and test the thermal cut-off safety valve
Check the tank body and the sacrificial anode for corrosion progress
Measure incoming water pressure and confirm it suits the unit's rating
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Usually the heat exchanger overheats and the safety valve shuts down automatically. We inspect the exchanger for limescale buildup and clean it with a safe chemical solution so flow returns to normal.
Yes, we use electronic gas leak detectors and blow low-pressure air through the lines. Any leak is pinpointed precisely without damage to the pipes during inspection.
