Tank body inspection
Checking the outer shell and all joints for seepage or moisture

Farwaniya
Heater leak detection in Rabiya starts by inspecting the metal tank, copper pipes and inlet valves. We use an electromagnetic moisture detector and precision gauging to identify hidden leaks. We examine every joint and solder for dried seepage and mineral salts. The report conveys the location, cause and available repair options.
Rabiya residential houses have heaters installed in utility rooms or master bathrooms with relatively short distribution pipes. Corrosion on steel pipes or weak rubber gaskets at hose bibs cause gradual seepage. We carefully inspect inlet valves and supply sections because some homes have old connections not serviced for years. We pass a moisture detector slowly around the tank base and wall to catch leakage that dries quickly.
Rabiya lies in Farwaniya governorate, a quiet residential area where houses have traditional design and are spaced apart.
We log pressure readings each minute for five minutes because slow Rabiya leaks may drop silently.
Checking the outer shell and all joints for seepage or moisture
Pinpointing concealed leaks by sound without opening the wall
Running a camera into supply or drain lines to trace the moisture source
Inspecting inlet, outlet and surrounding fittings for weeping joints
Checking the area around fuel or power entries for secondary moisture sources
Delivering a clear finding on where the leak is and what repair is needed
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, slow leaks leave dried dampness and white salt traces. A needle-sized pinhole can lose a full litre per hour without visible drops being seen.
If the leak is from a cold-water joint we isolate the inlet valve and bleed the tap. If it is from the tank or hot section we cut power for safety reasons.
