Element condition check
Resistance measured to confirm whether element is scaled, shorted or open

Hawalli
Replacing the heating element and thermostat in a Salmiya heater begins by checking water pressure and flow at all hot taps. We isolate the tank from power, extract the corroded element, test the thermostat, install new calibrated parts and restore operation.
Salmiya flats near the Gulf are mostly mid-sized with 80 or 100-litre heaters mounted in bathroom cabinets or under sinks. Seawater corrosion causes rapid element and copper pipe erosion nearby. When hot water stops we remove the heater cover and check element colour and salt deposits around the thermostat.
Salmiya sits on the Gulf coast in Hawalli governorate, a district of apartment blocks where seawater speeds heating element corrosion.
Element and thermostat electrical continuity are tested with an ohmmeter before final closure to prevent heating failure after we leave.
Resistance measured to confirm whether element is scaled, shorted or open
Cutout points tested and temperature calibration verified before fitting new part
Scale deposits inside the tank assessed as they reduce heating efficiency
Anode protects the tank from corrosion and is inspected at every service visit
Wiring and terminals inspected for safety before the new element is energised
Heater run and water temperature confirmed at the tap before the visit ends
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
No, only the element is replaced in about an hour. We cut power, unfasten the flange, remove the rusted element and fit a new copper one, then test heating.
The thermostat may be stuck in off position or the element is internally broken. We test resistance with an ohmmeter and replace whichever is faulty, then refill the tank and restart.
