Pipe routing
Mapping every copper run before walls are plastered over

Jahra
Central gas installation in Taima requires precise calculation of long runs between the meter and outlets in detached houses. We lay copper tubing in straight lines with steady fall toward consumption points. Every joint is tested under high pressure and documented before final handover.
Taima houses are scattered in desert suburbs, each with its own street entry. The meter sits far from interior outlets, so gas branches need long runs under the slab or in walls. We slope each branch naturally and avoid air pockets by checking vertical and horizontal fall. Pipes exposed to sunlight are protected with thermal wrapping.
Taima is a scattered residential area in Jahra governorate marked by wide spacing between houses and low-density building.
Long gas runs in Taima require sixty-minute pressure tests because length increases the chance of very slow leaks.
Mapping every copper run before walls are plastered over
Branching the network to each appliance position per plan
Fitting an isolation valve at every outlet for future servicing
Dry nitrogen charge and pressure hold test before handover
Core drilling wall openings and securing pipes with correct clips
Recording final pipe routes for future maintenance reference
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
No, we use thick metal sleeves or UV-resistant plastic conduit. Desert soil may contain salts that corrode copper, and roots can pressurize exposed pipes.
We locate the break using a field pressure detector, then excavate carefully. We remove the damaged section, solder new couplings and test the joint before reburying.
