Main pipe run
Running the supply line into the kitchen at the correct pipe diameter

Capital
A safe gas installation in a Khalidiya restaurant runs pipe from the main inlet to each cooking burner and water heater. We test pressure accurately, inspect joints with soapy water and retest before cooking begins.
Restaurants and cafés near Khalidiya Co-op and Khalidiya Park are usually medium-sized shops with average ceiling heights. We route pipes near the outer wall to minimise crossing water lines. We secure pipes with metal clips, blow out dust before testing and record all pressure readings in a table.
Khalidiya in Kuwait governorate is known for Khalidiya Park and quiet commercial shops spread along residential streets.
We run a static pressure test for thirty minutes on any new system with no gas flow to detect slow leakage.
Running the supply line into the kitchen at the correct pipe diameter
Dedicated branch for each burner, oven, grill or fryer in the kitchen
Valve at each appliance so one unit can be isolated without stopping the whole line
Pipes run inside the wall or surface-mounted to suit the building structure
Completed network tested under dry nitrogen pressure before any appliance is connected
Inspecting or extending a working kitchen gas network with minimal downtime
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, galvanised steel is safe and cheaper. We solder joints with silver solder or use threaded brass fittings and test the same way.
A single pipe is tested before connecting to appliances to confirm it is sound. The full system is tested after all appliances and valves are connected to verify everything works together.
