Crack welding
direct thermal weld along each fracture line in the tank wall

Farwaniya
Tank welding in Ishbiliya requires careful inspection of each tank because family homes use many different types and sizes. We identify the material, cracks and weak joints, then clean, dry and weld carefully. We test by filling the tank and watching it for hours before handover.
Ishbiliya Co-op homes are mostly fitted with fibreglass or plastic tanks on relatively low roofs. These tanks face extreme summer heat and rapid night cooling, causing repeated expansion and shrinking. Fine cracks appear quickly at corners and the base where stress concentrates most. We pressure-test every joint and look for water seeping below the tank or around its base.
Ishbiliya is located in Farwaniya governorate, a family residential area where roof tanks are necessary to ensure steady water distribution.
We run the tank by pumping alternating cold and hot water to simulate natural expansion and find any weld weak points.
direct thermal weld along each fracture line in the tank wall
re-welding inlet and outlet fittings where the flange joint has failed
resin-and-mat layer over the damaged zone before the final weld seal
internal camera after welding reveals any weak point before refilling
replacing the tank lid when the leak source is the cover seal
written record of weld locations and camera inspection result
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
The visible crack may be superficial or point to deeper weakness in the tank. Water leaks from the weakest spot, often at the base or where the base joins the wall. We inspect the entire tank, not just one crack.
Good welding lasts years if the tank is sound to begin with. But if the tank is old and the material is degrading, it may need re-welding later. We tell you at handover if the tank is nearing the end of its service life.
