Crack welding
direct thermal weld along each fracture line in the tank wall
Farwaniya
Tank welding in Omariya
Tank welding in Omariya fixes cracked plastic and fibreglass tanks in suburban homes. We locate the crack, drain the tank, prepare the damaged area and weld it for a tight seal.
- 24-hour emergency
- Camera first, every job
- Leak detection without breaking
- All six governorates
What sets this area apart
Homes in Omariya typically have medium-sized tanks on roofs or beside walls, and cracks often appear after years of use or from minor impact. We inspect each tank for fine cracks around corners and the base before welding. If the tank sits beside a courtyard wall, we may need to drain water directly downward to the floor trap.
Omariya lies in Farwaniya governorate as a suburban residential area, where families rely on private tanks to store water.
After welding, the tank is half-filled and left overnight to watch for any drips before final approval.
What the service covers
Joint repair
re-welding inlet and outlet fittings where the flange joint has failed
Fibreglass patching
resin-and-mat layer over the damaged zone before the final weld seal
Seal verification
internal camera after welding reveals any weak point before refilling
Hatch replacement
replacing the tank lid when the leak source is the cover seal
Post-work report
written record of weld locations and camera inspection result
How we work
Our four steps, and you see every one
You call and describe it
Tell us what is happening and where, and the right equipment is loaded before we arrive.
The camera goes down
We film the line from inside and know the kind of blockage and its exact place. No guessing.
We clear it
High pressure water, a machine or a drain snake, whichever the line actually needs.
We film it again
The camera runs a second pass and you see the line clear with your own eyes before we leave.
Who we work for
Same method, same equipment. Only the size of the job changes.
Homes and apartments
- Drain and gully unclogging
- Cesspit suction
- Leak detection without breaking
- Tank cleaning and waterproofing
Offices
- Plumbing maintenance contracts
- Mixer and valve repair
- Low water pressure
- Clearing bathroom lines
Restaurants
- Grease traps
- Commercial kitchen lines
- Restaurant gas lines
- Scheduled clearing and cleaning
Complexes and buildings
- Sewer network maintenance
- Sewage and basement sump pumps
- Manhole and inspection chamber cleaning
- Operation and maintenance contracts
Why us
Why Al Amana
Amana means trust. Someone else's home is not ours to be careless in.
Filmed before and after
Do not take our word for it. Look at the line yourself.
Clearing before breaking
Breaking is the last resort, never the first step.
24-hour emergency
A blocked line does not wait for the morning.
All of Kuwait
Six governorates, 139 areas.
Maintenance contracts
For buildings and complexes, servicing before the problem starts.
We work on commercial sites too
Restaurants, offices and complexes, not only homes.
More areas for Tank welding
Other services in Omariya
Underground tank cleaning
See the detailsWater tank cleaning
See the detailsWater tank restoration
See the detailsEpoxy tank lining
See the detailsCommon questions
Questions about Tank welding in Omariya
Need someone now? The emergency line is open any hour.
+965 9668 4964
Can a small leak be fixed without welding the full crack?
If the crack is under five centimetres and very fine we may use temporary filler, but it does not last long. Proper welding is permanent because it fuses the material itself rather than adding outside matter.
Is a new tank better than welding an old one?
A new tank costs more and may take longer to install. Welding extends the tank life several years if done properly, especially for the first or second crack.
