Fill valve
Adjusted or replaced when filling is slow, noisy or never stops.

Ahmadi
Toilet cistern repair in Fahad Al-Ahmad starts with checking the entire fill and flush cycle. We inspect the float ball, inlet valve, flush cone and lift rod. We locate the leak or weak pressure, replace failed parts and test the system at full pressure.
Most homes in Fahad Al-Ahmad were built decades ago with old ceramic roof tanks or plastic cisterns inside the wall. Older tanks corrode inside and lose pressure even if no leak shows. We open the lid, check sediment and rust and clear debris from the inlet valve. If the flush cone leaks we replace it with a new sealed unit.
Fahad Al-Ahmad lies in Ahmadi governorate, a family residential area where most cisterns are connected to older ground-floor toilet pans.
We test each cistern with repeated fill and flush cycles to monitor water pressure on the lift rod and flush cone.
Adjusted or replaced when filling is slow, noisy or never stops.
Repaired when water trickles constantly from cistern to pan.
Set or replaced to restore the correct water level inside.
Checked and reseated when the joint leaks at floor level.
Broken or loose seats replaced on the same visit.
Wax or rubber seal replaced when water pools at the base.
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We start by repairing the moving parts and valves, as they are cheaper and faster. If the leak persists from the tank body itself or pressure continues to drop, full replacement is the only option.
We shut off the inlet valve first to stop fresh water entering, then drain the cistern completely before opening the lid. This is essential for working safely and controlling each joint easily.
