Fill valve
Adjusted or replaced when filling is slow, noisy or never stops.

Mubarak Al-Kabeer
Stopping a cistern leak in Mubarak Al-Kabeer means checking the refill mechanism, float and main valve as one system. We diagnose the fault, replace worn seals and valves, and measure final pressure.
In Mubarak Al-Kabeer family homes cistern heights vary with the building age; some have tall wall-hung tanks and others have modern tanks built into the wall. We climb to the high tank and check the float arm for sagging and stiffness. In built-in cisterns we carefully open the front panel to reach the fill valve and flush pressure adjuster.
Mubarak Al-Kabeer is a residential district of large family houses near Messila Beach where cisterns vary in age and type by building date.
We test internal water pressure with a hand gauge because high pressure damages the fill valve faster.
Adjusted or replaced when filling is slow, noisy or never stops.
Repaired when water trickles constantly from cistern to pan.
Set or replaced to restore the correct water level inside.
Checked and reseated when the joint leaks at floor level.
Broken or loose seats replaced on the same visit.
Wax or rubber seal replaced when water pools at the base.
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
The float may be jammed or the arm stuck on the fill pipe, or the fill valve itself is seized. We work the arm by hand first, and if it moves freely the valve needs replacing.
We check the isolating valve and connector thread first, because most leaks come from there. If the connector is tight we open the cistern and look inside for cracks or pinhole leaks.
