Fill valve
Adjusted or replaced when filling is slow, noisy or never stops.

Capital
Cistern repair in Qibla begins with checking the full fill and flush cycle. We inspect the inlet valve, float, lever arm, flush valve and water path to the pan. We identify the leak or weak flush source, then replace faulty parts or clear blocked passages.
Qibla's older buildings rising above the gulf road near Seif Palace and Commercial Bank have high-set cisterns and elevated drainage arrangements. The high tank provides powerful flush but old pipes corrode from salt and moisture, and valve leaks become common. We disassemble the valve carefully, inspect seating and rubber seals, and replace what needs it without cutting the water supply.
Qibla in Kuwait governorate mixes heritage buildings with modern highways, and its high-tank systems there require regular maintenance checks.
Every repair is tested by filling and draining the cistern twice in succession, timing until flow stops completely.
Adjusted or replaced when filling is slow, noisy or never stops.
Repaired when water trickles constantly from cistern to pan.
Set or replaced to restore the correct water level inside.
Checked and reseated when the joint leaks at floor level.
Broken or loose seats replaced on the same visit.
Wax or rubber seal replaced when water pools at the base.
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
If corrosion is surface-level, gentle brushing and rinsing with fresh water may suffice, but if the seat is cracked or distorted, replacement is safer. We inspect the seat first before deciding.
The water path to the pan may be clogged with scale, or the flush valve lever arm not opening fully. We check the outlet tube, adjust the arm and ensure the rod is not bent.
