Pressure unblocking
Controlled water or air pressure dislodges deposits blocking the pipe.

Unblocking internal water supply pipes in homes, offices, and commercial buildings across Kuwait
Controlled water or air pressure dislodges deposits blocking the pipe.
Internal camera pinpoints the exact blockage position before any intervention.
Calcium buildup narrows bore gradually until flow stops completely.
Hidden in-wall lines cleared without unnecessary tile or plaster breaking.
Second camera pass confirms a clear bore and documents it for the customer.
If the pipe itself is cracked, camera footage guides the repair decision.
Describe the blockage, its location, and the building type when you contact us.
Camera films the pipe interior to locate the blockage before any tool enters.
Inspection findings determine whether pressure, snake, or descaling is used.
Blockage removed and line flushed to confirm full and free flow.
Second camera pass documents the clear bore; customer views it on the same screen.
Films the bore before and after work so the customer sees the result on the same screen.
Controlled pressure pulses break mineral deposits loose and flush them without damaging the pipe wall.
Reaches solid blockages at tight bends where pressure alone cannot break the obstruction.
Applied in heavily scaled pipes to dissolve calcium buildup before flushing the line.
Note whether one fixture is affected or several; this tells us if the block is local or further along.
Very low flow or total stoppage points to different blockage types and different clearing methods.
Old galvanised iron corrodes internally and needs a different approach than PPR or uPVC lines.
Knowing where the nearest isolation valve is speeds up the start and limits water loss during work.
Part of Water pipe runs · All services · Back to the home page
No fixed rate applies; these factors shape the final quote for each job
A near-access blockage is quicker than one buried deep inside a wall or slab.
Mineral scale, a foreign object, and a collapsed pipe each need a different method.
Corroded galvanised iron takes more time to clear than modern PPR or uPVC lines.
If wall access is unavoidable, breaking and finishing add to the overall cost.
Night or weekend calls may be priced differently from standard working hours.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else’s home is not ours to be careless in.
Do not take our word for it. Look at the work yourself.
The leak is marked before a single tile comes up.
A leak does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Six governorates, 139 areas.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Usually yes. The camera pinpoints the blockage, and pressure tools or the mechanical snake reach it through existing access points. Breaking is a last resort used only when the pipe itself is found to be cracked or collapsed.
Unblocking targets an existing blockage that has stopped or severely restricted flow. Cleaning removes partial scale or residue buildup before it becomes a full block, making it a preventive rather than a reactive step.
Older homes commonly have galvanised iron pipes that corrode from inside. Rust and mineral deposits from Kuwait's hard water gradually narrow the bore. Repeated blockages at the same point often mean the pipe needs partial replacement rather than repeated clearing.
Yes. Calcium scale can narrow a supply pipe enough to cut flow significantly while the pump runs at full capacity. A camera inspection tells us whether the problem is in the pipe bore or the pump before any repair is attempted.
In most cases only the isolation valve serving the affected line is closed, leaving all other units with normal supply. A full building shutoff is only needed if the blockage is on the main shared riser or header pipe.
