Current pump assessment
Checking amperage, pressure and mechanical condition before any decision

Capital
Factory cesspit maintenance in Shuwaikh Industrial focuses on heavy flows and variable loads across production hours. We inspect the pump, test discharge pressure and performance, and verify that aged delivery pipework can handle the strain before approval.
Large factories and warehouses in Shuwaikh Industrial have cesspits of huge capacity receiving discharge from wash, cooling and cleaning processes. Pumps here run in repeated hot and cold cycles, and copper and steel pipes in delivery lines corrode internally from hot water and suspended metals. We dismantle ball valves, measure pipe wall thickness with a probe and check for leaks at old wax-sealed pipe joints.
Shuwaikh Industrial lies in Kuwait governorate and houses factories, warehouses and specialized logistics centres.
We perform cold and hot pressure tests on the delivery line to simulate real production conditions.
Checking amperage, pressure and mechanical condition before any decision
Sizing by pit volume, depth and discharge pipe diameter
Discharge line fitted with a non-return valve and sealed joints
Moisture-rated connection suited to a submerged cesspit environment
Float set to correct on and off levels to prevent dry running
Pit filled and a full pump cycle run before the technician leaves
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
It usually means a leak in the buried delivery line or internal rust has opened a pinhole. We test pressure by closing the final valve for five minutes; any drop reveals the leak.
No, but we monitor motor temperature, and if it exceeds 60 Celsius the liquid needs cooling via short stops. We suggest fitting a thermometer on the motor housing.
