Copper or steel pipe run
Correct diameter pipe sized to kitchen appliance load and inlet pressure.

Hawalli
A kitchen gas line in Salwa starts from the main inlet and runs to every appliance in the kitchen. We test pressure and leaks at every joint and confirm the pipe has the right fall away from water and wiring. Copper or black steel is standard, with flex only in the last meter before the stove or cooker.
Most Salwa houses follow a single layout with the kitchen tucked in the back corner and the main gas inlet near the service door. We run the line along the outer wall under tiles or panels, or clamp it to the surface with metal brackets if the run is short. Every metre of pipe is tested with dish soap to catch any tiny bubbles that might show a pinhole or loose fitting.
Salwa sits in Hawalli governorate, a quiet residential district where a long horizontal gas run from the inlet to the kitchen is the common standard.
Every threaded joint on the line is pressure-tested before the first appliance is activated, because early testing prevents steam leaks later.
Correct diameter pipe sized to kitchen appliance load and inlet pressure.
Individual outlet with isolation valve for each hob, oven or fryer.
Pipe run inside protective conduit or channel with ventilation clearance observed.
Joints finished by brazing or press-fit method suited to the pipe material.
Nitrogen pumped to test pressure and held to confirm every joint is tight.
Inspection of an existing run and repair of any corroded section or weeping joint.
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, if the line is approved copper that bends slightly. We run it with a gentle rise from the inlet, cover it with new tile and pressure-test it before sealing the tile finally.
The main line can branch at one point using an approved three-outlet manifold. Each branch is tested separately then together under full load.
