Frame and tray level
Frame and tray set perfectly flat so water drains fully

Jahra
Shower cabin installation in Qasr requires understanding how bathrooms are designed in that area. We measure the space precisely, align the frame with walls, fit glass and door then seal all gaps with moisture-resistant silicone.
Houses in Qasr have relatively narrow bathrooms with water and waste pipes fixed directly to the walls. When setting the cabin, we avoid existing pipes and reposition the frame if needed. We inspect where the cabin meets the back wall for gaps that let moisture behind the silicone and tile surface, ensuring every corner is completely filled.
Qasr lies in Jahra governorate, a historic residential area where bathrooms are confined to limited space.
We use an air-powered silicone gun with steady pressure because hand force causes tiny breaks in the silicone line.
Frame and tray set perfectly flat so water drains fully
Trap connected to waste line at the correct fall
Flexible supply lines connected to isolation valve and shower outlet
Sanitary silicone applied along every profile edge and corner
Door magnets and hinges adjusted so the panel closes firmly
Water run, drain checked, all edges inspected for leaks
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, even a one millimetre gap lets water seep behind silicone when the wall stays damp. We use foam tape to fill larger gaps before injecting silicone so the seal is multi-layered and more reliable.
We do not prefer this because the gap would let spray behind the cabin and trap moisture in the wall. The cabin must touch the wall directly so the seal is complete and sound across its full depth.
