Position and level
Pan set level and aligned to the waste outlet centre for proper drainage

Ahmadi
Western toilet installation at Zour accounts for extreme heat and raised pipes above grade due to expansion. We choose heat-treated materials, run waste and water with safe suspended clearances, and test full-pressure flush.
Power plants at Zour need toilets in isolated cabins with high ceilings under steel structures. Copper pipes expand in heat, so we fit expansion loops every three metres. The floor trap may sit far from the fixture because the foundation is dug deep to carry waste away from cooling fans.
Zour sits in Ahmadi governorate, a power generation zone where extreme heat affects plumbing materials.
We test supply pipes under midday sun because Zour regularly reaches 50 degrees Celsius or more.
Pan set level and aligned to the waste outlet centre for proper drainage
Wax ring or rubber gasket fitted between pan base and the floor outlet flange
Braided flexible supply tail and a dedicated isolation valve fitted to the cistern
Cistern mounted and float valve adjusted for correct fill level and full flush
Sanitary silicone bead around the pan base stops water tracking under the tile
Multiple flush cycles run immediately after fitting to confirm all joints are dry
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Heat slightly reduces pressure and increases expansion. We fit a slightly larger bore and wait 10 minutes after intense sun before testing pressure.
No, if the loops sit above the trap with steady fall maintained. We ensure the waste path always slopes downward even after thermal expansion.
