Crack welding
direct thermal weld along each fracture line in the tank wall

Ahmadi
Welded tank repair in Fahad Al-Ahmad fixes cracks in fibreglass and failed joints in rooftop and ground tanks. We inspect the whole tank, locate the leak and pressure test before welding. Clean the area, apply strong epoxy resin or seal cracks based on tank type. The tank returns to service same day.
In Fahad Al-Ahmad rooftop tanks are very common because the area was built as spread suburban housing with space between each plot. Every house has a rooftop tank and a ground tank in the back yard, and plastic tanks crack from seasonal heat and pressure shifts. Small cracks in the tank floor or at pipe joints stay hidden until the tank fills completely and water begins to seep out. We inspect every joint from the main inlet to the overflow outlet and test by filling the tank with water and watching for flow before welding.
Fahad Al-Ahmad is in Ahmadi governorate, a residential suburb where most buildings are family houses with flat roofs.
A welded tank is pressure tested under full water load for one hour because new joints need time to set.
direct thermal weld along each fracture line in the tank wall
re-welding inlet and outlet fittings where the flange joint has failed
resin-and-mat layer over the damaged zone before the final weld seal
internal camera after welding reveals any weak point before refilling
replacing the tank lid when the leak source is the cover seal
written record of weld locations and camera inspection result
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
No, the tank must be fully drained before welding so water does not spoil the soft resin. Water returns to the tank six hours after welding and testing are complete.
All cracks and weak joints are repaired in one visit. We measure each spot and pressure test once for all repairs together.
