Crack welding
direct thermal weld along each fracture line in the tank wall

Capital
Tank welding in Khalidiya addresses holes and seepage from metal fittings in tanks placed in villa gardens. We spot the leak with soapy water, remove the metal pipe if needed, weld the hole and reconnect the pipe securely.
Upmarket villas in Khalidiya near the park have tanks installed in courtyards or beside garages, often plastic or fibreglass. Metal inlet and outlet pipes corrode or rust from water and weather, especially if old or mixed metals. When water seeps around a metal pipe, we carefully loosen the joint, clean salt and rust from the hole, weld it with strong compound and refit the pipe. After welding we seal the joint with a tight wrap to keep moisture out.
Khalidiya is in Kuwait governorate, an upscale villa district near Khalidiya Park where most homes have exterior tanks exposed to weather.
After refitting the pipe we test by opening the valve and watching for any water drip or moisture around the welded joint for five minutes.
direct thermal weld along each fracture line in the tank wall
re-welding inlet and outlet fittings where the flange joint has failed
resin-and-mat layer over the damaged zone before the final weld seal
internal camera after welding reveals any weak point before refilling
replacing the tank lid when the leak source is the cover seal
written record of weld locations and camera inspection result
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
If the fitting is only rust on the outside, we clean it and reuse it after welding. But if rust has eaten through the metal and weakened it, we advise replacing it with a brass or stainless steel fitting.
Yes, leaking water leaves white mineral salt marks on the courtyard floor and tank walls. After welding we wipe the area with a damp cloth to remove old deposits, then monitor the courtyard for a week to confirm no new seepage returns.
