Crack welding
direct thermal weld along each fracture line in the tank wall

Capital
Tank welding in Nahda addresses broken pipes and corroded joints in plastic tanks stored on ground floors. We locate the crack or hole by careful inspection and testing, dry the area, weld at suitable heat and verify the seal.
Residential buildings in Nahda near the Fourth Ring Road junction use plastic tanks placed in basement rooms or inner courtyards. In these enclosed, damp spaces, plastic becomes brittle over time, especially around metal inlet pipes that may shift slightly. When we find a small hole near a metal pipe, we sometimes need to loosen the pipe partially to clean moisture from the area before welding. Testing is done by filling the tank and waiting to check for water pooling on the floor.
Nahda is in Kuwait governorate, a dense residential district at the Fourth Ring Road junction where buildings rely on ground-level tanks for water reserves.
We test the weld by filling the tank completely and observing for half an hour before approving for use.
direct thermal weld along each fracture line in the tank wall
re-welding inlet and outlet fittings where the flange joint has failed
resin-and-mat layer over the damaged zone before the final weld seal
internal camera after welding reveals any weak point before refilling
replacing the tank lid when the leak source is the cover seal
written record of weld locations and camera inspection result
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We wipe the tank surface with a dry cloth, then fill it slowly and watch for drips or small pools on the floor around it. Then we mark the spot from outside, wipe away drips and dry before welding.
If the weld is done correctly on a sound plastic tank with no other cracking, it can last several years. But if we spot other cracks during inspection, we tell you the tank may need replacement soon.
