Tank installation
Mounting the tank on a level concrete base to protect its base from cracking

Ahmadi
A roof tank at Mina Abdullah must endure harsh coastal conditions and salt that corrodes metal. We place it in a wind-sheltered spot, use corrosion-resistant materials, and test every joint before operation.
Buildings at Mina Abdullah sit near salt water and face strong year-round winds, and ordinary steel tanks rust quickly. We choose fibreglass or heavy galvanized steel tanks and set them away from edges where wind exposure is less. Copper or heavily galvanized pipes resist salt, and we wrap every joint with anti-corrosion tape.
Mina Abdullah lies in Ahmadi governorate on the Gulf coast, a port and export facility zone that depends on water quality and steady pressure.
After installation, all pipes and joints are tested with salt spray to confirm they hold tight in marine conditions.
Mounting the tank on a level concrete base to protect its base from cracking
Running the fill line and distribution line to floors in PPR pipe
Installing the overflow at correct slope so no water pools on the roof
Connecting the existing transfer or pressure pump and setting its switch
Fitting a brass float valve sized to the tank for accurate fill cut-off
Testing all joints under pressure before handover to confirm no leaks
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
High-quality fibreglass resists salt and wind well, but we choose sufficient thickness and mount it on heavy galvanized steel brackets. We inspect the shell and fittings every six months for cracks.
Red copper resists salt naturally but costs high for long runs. We use heavy galvanized steel with thick zinc plating and wrap each joint with insulating sealant that blocks salt.
