Tank installation
Mounting the tank on a level concrete base to protect its base from cracking
Ahmadi
Roof tank installation in Fahad Al-Ahmad
Roof tank installation in Fahad Al-Ahmad starts with checking roof strength and space between the main support column and the edge. We choose a spot that balances pump distance with maintenance access. We fix the base and legs, connect fill and overflow pipes, then test under pressure.
- 24-hour emergency
- Camera first, every job
- Leak detection without breaking
- All six governorates
What sets this area apart
Family houses in Fahad Al-Ahmad have wide flat roofs, and we position the tank away from stairwell openings and aerials to keep access safe and checking easy. We set the tank legs so the pump suction point on the base sits as close as possible to the riser. We measure the fill pipe fall from tank to main line and the overflow run to floor drain or main sump.
Fahad Al-Ahmad is in Ahmadi governorate, a suburban district dominated by two to four storey family houses.
After fixing, we fill the tank with water and monitor pump pressure to check for leaks at every connection.
What the installation covers
Inlet and supply lines
Running the fill line and distribution line to floors in PPR pipe
Overflow and drain line
Installing the overflow at correct slope so no water pools on the roof
Pump connection
Connecting the existing transfer or pressure pump and setting its switch
Float valve fitting
Fitting a brass float valve sized to the tank for accurate fill cut-off
Pressure test
Testing all joints under pressure before handover to confirm no leaks
How we work
Our four steps, and you see every one
You call and describe it
Tell us what is happening and where, and the right equipment is loaded before we arrive.
The camera goes down
We film the line from inside and know the kind of blockage and its exact place. No guessing.
We clear it
High pressure water, a machine or a drain snake, whichever the line actually needs.
We film it again
The camera runs a second pass and you see the line clear with your own eyes before we leave.
Who we work for
Same method, same equipment. Only the size of the job changes.
Homes and apartments
- Drain and gully unclogging
- Cesspit suction
- Leak detection without breaking
- Tank cleaning and waterproofing
Offices
- Plumbing maintenance contracts
- Mixer and valve repair
- Low water pressure
- Clearing bathroom lines
Restaurants
- Grease traps
- Commercial kitchen lines
- Restaurant gas lines
- Scheduled clearing and cleaning
Complexes and buildings
- Sewer network maintenance
- Sewage and basement sump pumps
- Manhole and inspection chamber cleaning
- Operation and maintenance contracts
Why us
Why Al Amana
Amana means trust. Someone else's home is not ours to be careless in.
Filmed before and after
Do not take our word for it. Look at the line yourself.
Clearing before breaking
Breaking is the last resort, never the first step.
24-hour emergency
A blocked line does not wait for the morning.
All of Kuwait
Six governorates, 139 areas.
Maintenance contracts
For buildings and complexes, servicing before the problem starts.
We work on commercial sites too
Restaurants, offices and complexes, not only homes.
More areas for Roof tank installation
Other services in Fahad Al-Ahmad
Underground tank construction
See the detailsAcoustic leak listening
See the detailsApartment first-fix
See the detailsBasement sump pump
See the detailsCommon questions
Questions about Roof tank installation in Fahad Al-Ahmad
Need someone now? The emergency line is open any hour.
+965 9668 4964
How high must the tank sit above the highest tap in the house?
At least one metre above the highest tap ensures adequate pressure for cold water in all storeys. We measure from the tank inlet to the topmost tap and test flow before handover.
Should the tank sit on tall legs or can it rest directly on the roof?
Legs are essential to lift the tank base so the pump suction joint can fit underneath and cleaning is possible. We choose leg height based on the suction pipe run and available roof space.
